Pages
▼
Sunday, December 25, 2011
12 - Mesa Dual Rectifier MODERN Eleven Rack Rigs
ERXP REQUIRED!
Content list:
Mesa Dual Rec 57
Mesa Dual Rec 65
Mesa Dual Rec 87
Mesa Dual Rec GR
Mesa Dual Rec R1
Mesa Dual Rec R3
Mesa Dual Rec R5
Mesa Dual Rec R7
Mesa Dual Rec R9
Mesa Dual Rec RB
Mesa Dual Rec Y3
Mesa Dual Rec Y7
Tuesday, December 13, 2011
FCB-1010 + EurekaProm for the Eleven Rack
The FCB-1010 is a great solution if you are looking for a MIDI footboard to control the Eleven Rack.
The prom included in the FCB-1010 can be difficult to program, and even once programmed some features may be lacking. Enter the EurekaProm by Eureka Sound!
The EurekaProm eliminates the need to do any programming. You simply install the eProm in the FCB-1010, choose the Eleven Rack Mode, and you are ready to jam!
The EurekaProm can control more than the Eleven Rack, it comes pre-programmed with modes for the:
- Behringer V-Amp Series
- Behringer Bass V-Amp Series
- Avid Eleven Rack
- TC Electronics G-Force
- TC Electronics G-Major
- TC Electronics G-Sharp
- TC Electronics Nova
- Roger Linn Design AdrenaLinn III
- Roland VG-99 & VB-99
- Line 6 POD series
- Plus a Programmable Mode (which in default works for the Axe FX, Boss RC-50 and others )
All of that in ONE eProm. And NO programming, unless of course you want to program - The EurekaProm has you covered.
Behringer FCB-1010 + Uno Eprom
The Behringer FCB-1010 midi controller is a great solution for the Eleven Rack.
The included Prom requires a lot of programming to work with the Eleven Rack, so a possible solution is adding the Uno eProm which adds extra possibilities too the FCB-1010.
There is even a pre-made Sysex file that you can download and load into the Uno eProm so you can start using the FCB-1010, UNO, and Eleven Rack in a matter of minutes.
The included Prom requires a lot of programming to work with the Eleven Rack, so a possible solution is adding the Uno eProm which adds extra possibilities too the FCB-1010.
There is even a pre-made Sysex file that you can download and load into the Uno eProm so you can start using the FCB-1010, UNO, and Eleven Rack in a matter of minutes.
Dial Out The Mud With The Parametric EQ
Nobody wants muddy, stuffy tone. Luckily with the Parametric EQ in the Eleven Rack, you will have no problem dialing OUT the mud, and dialing IN the awesome.
Thursday, December 8, 2011
8 - Soldano SLO-100 Eleven Rack Rigs - Pack 2
BSC Eleven Rack Rigs - Soldano SLO-100 DIG Pack #2
8 Rigs/Presets
Eleven Rack Expansion Pack Required For Use.
Adjust Gain As Needed.
Content List:
OVERDRIVE:
SLO-100 DIG 121B
SLO-100 DIG 121K
SLO-100 DIG 121S
SLO-100 DIG 121V
SLO-100 DIG 121W
SLO-100 DIG 121X
SLO-100 DIG 121Y
CRUNCH:
SLO-100 Toasty87
Sunday, December 4, 2011
New Eleven Rack Bundle and the Eleven Rack Expansion Pack (ERXP)
If you were one of the people who purchased the new Eleven Rack bundle that included the ERXP pre-installed, and it should also have included Pro Tools 9 with a free upgrade to Pro Tools 10; you probably noticed the the Eleven Rack Window in Pro Tools did not properly reflect the rigs of the Eleven Rack.
Some how Avid over looked the fact that you could not properly use the on-screen 11R editor because Pro Tools (since version 8.0.1) only includes the needed UI files for the base 11R amps, effects, mics, ect...
To be able to use the the on-screen editor with an 11R that has the ERXP installed you need the updated UI files.
Well Avid has responded by making the ERXP download available to everyone. Before you only had access to the ERXP installer if you purchased the ERXP from the Avid store or another retailer.
Some how Avid over looked the fact that you could not properly use the on-screen 11R editor because Pro Tools (since version 8.0.1) only includes the needed UI files for the base 11R amps, effects, mics, ect...
To be able to use the the on-screen editor with an 11R that has the ERXP installed you need the updated UI files.
Well Avid has responded by making the ERXP download available to everyone. Before you only had access to the ERXP installer if you purchased the ERXP from the Avid store or another retailer.
5 Soldano SLO-100 Eleven Rack Rigs - Pack 1
ERXP REQUIRED
Contents list:
SLO-100 B30 SM57
SLO-100 V30 7
SLO-100 DIG 121
SLO-100 DIG 121M (slightly less gain, different eq curve)
SLO100 Clean B30
Contents list:
SLO-100 B30 SM57
SLO-100 V30 7
SLO-100 DIG 121
SLO-100 DIG 121M (slightly less gain, different eq curve)
SLO100 Clean B30
38 BSC Eleven Rack Rigs
Benoni Studios Custom(s) ( aka.."BSC") Eleven Rack Rigs/Presets
BSC Rigs are not modeled after any specific Amp Brands.
BSC Rigs are original creations.
Eleven Rack Expansion Pack REQUIRED for use.
38 Rigs Total.
These are COMPLETE RIGS, meaning every effects slot has been set to a value. In some Rigs- Distortion, or Mod, or FX1 or 2 ect..... may be turned OFF by default, but the effect in the slot has been set to compliment each Rig. So go through each Rig and try out each effect, turn some ON, turn some OFF ect...
14 Diezel Hagen/Herbert Eleven Rack Rigs
10 Diezel Hagen Rigs
4 Diezel Herbert Rigs
ERXP Required
Adjust Gain as needed.
1 = Channel 1 (Clean)
2 = Channel 2 (Crunch)
3 = Channel 3 (Lead/Heavy)
4 = Channel 4 (Lead/Mega)
13 Rivera Knucklehead Eleven Rack Rigs
ERXP REQUIRED
Content List:
RIVERA KNUCKLEHEAD SEVEN Rigs
"B" means the Rig is modeled after a K7 with the Boost ON
K100 - Means the rig referenced was using Celestion G12K-100 speakers
V30 - Means the rig referenced was using Celestion Vintage 30 speakers
Rivera K7 B30 B
Rivera K7 K100 B
Rivera K7 K100
Rivera K7 S+B (combo of Boost ON and OFF)
Rivera K7 V30 B
Rivera K7 V30
Rivera K7 CLEAN (Clean sound of the K7)
RIVERA KNUCKLEHEAD TRE Rigs
Rivera K-Tre C1
Rivera K-Tre JD1
Rivera K-Tre JD2
Rivera K-Tre JD3
Rivera K-Tre JD4
RIVERA KNUCKLEHEAD SEVEN & TRE Rig
A Hybrid of the tone of the K7 and K-Tre
Rivera K7-Tre
The names *Rivera*, *Knucklehead*, *Seven*, and *Tre* are only used to describe the tone of the presets.
These presets are NOT endorsed by Avid, or Rivera
2 Hughes & Kettner Coreblade Eleven Rack Rigs
ERXP REQUIRED
Content List:
H&K Coreblade U1
H&K Coreblade U2
These are an emulation of the Coreblade amps Ultra 1 and Ultra 2 channels respectively
These Rigs are NOT endorsed by Avid or Hughes & Kettner
3 Comfortably Numb Eleven Rack Rigs
ERXP REQUIRED
Content List:
Comfortably Numb
Comfortably Numb3
PF Comfort Numb
The names *Comfortably Numb* and *Pink Floyd* are only used to describe the tone of the presets.
These presets are NOT endorsed by Avid, David Gilmore, or Pink Floyd
3 Diezel Hagen Eleven Rack Rigs
Eleven Rack Expansion Pack required for use.
Adjust GAIN to taste.
Content List:
Diezel Hagen V30
Diezel Hagen MSB
Diezel Hagen B2
3 Titan Cerberus Eleven Rack Rigs
ERXP REQUIRED
Adjust GAIN to taste. If you find any rigs to "harsh" try reducing the Treble or Presence a notch and/or reduce the gain on the HF shelf of the parametric EQ.
4 Peavey 5150/6505 Eleven Rack Rigs
ERXP REQUIRED
Contents List:
Peavey 5150 X
Peavey 6505-C
Peavey 6505-M
Peavey 6505-S
The names *Peavey*, *5150*, and *6505* are only used to describe the tone of the Rigs
These Rigs are NOT endorsed by Avid or Peavey
Contents List:
Peavey 5150 X
Peavey 6505-C
Peavey 6505-M
Peavey 6505-S
The names *Peavey*, *5150*, and *6505* are only used to describe the tone of the Rigs
These Rigs are NOT endorsed by Avid or Peavey
4 Splawn NITRO Eleven Rack Rigs
ERXP REQUIRED
Adjust GAIN to taste, the sounds I had to work with had alot of gain, so I modeled the Rigs to be close.
2 presets based on a Nitro with EL43's
2 presets based on a Nitro with KT88's
JCM-800 2203KK Eleven Rack Rig
ERXP REQUIRED
This rig is based on a Kerry King amp model - JCM-800 2203KK
The sample I built this from had Kerry playing the amp himself.
This rig is based on a Kerry King amp model - JCM-800 2203KK
The sample I built this from had Kerry playing the amp himself.
47 Pre-ERXP Eleven Rack Rigs
These presets were made before the ERXP was released, several of the Rigs have been remade with the ERXP and they