Sunday, December 25, 2011
Mesa Dual Rec 57
Mesa Dual Rec 65
Mesa Dual Rec 87
Mesa Dual Rec GR
Mesa Dual Rec R1
Mesa Dual Rec R3
Mesa Dual Rec R5
Mesa Dual Rec R7
Mesa Dual Rec R9
Mesa Dual Rec RB
Mesa Dual Rec Y3
Mesa Dual Rec Y7
Tuesday, December 13, 2011
The FCB-1010 is a great solution if you are looking for a MIDI footboard to control the Eleven Rack.
The prom included in the FCB-1010 can be difficult to program, and even once programmed some features may be lacking. Enter the EurekaProm by Eureka Sound!
The EurekaProm eliminates the need to do any programming. You simply install the eProm in the FCB-1010, choose the Eleven Rack Mode, and you are ready to jam!
The EurekaProm can control more than the Eleven Rack, it comes pre-programmed with modes for the:
- Behringer V-Amp Series
- Behringer Bass V-Amp Series
- Avid Eleven Rack
- TC Electronics G-Force
- TC Electronics G-Major
- TC Electronics G-Sharp
- TC Electronics Nova
- Roger Linn Design AdrenaLinn III
- Roland VG-99 & VB-99
- Line 6 POD series
- Plus a Programmable Mode (which in default works for the Axe FX, Boss RC-50 and others )
All of that in ONE eProm. And NO programming, unless of course you want to program - The EurekaProm has you covered.
The included Prom requires a lot of programming to work with the Eleven Rack, so a possible solution is adding the Uno eProm which adds extra possibilities too the FCB-1010.
There is even a pre-made Sysex file that you can download and load into the Uno eProm so you can start using the FCB-1010, UNO, and Eleven Rack in a matter of minutes.
Thursday, December 8, 2011
BSC Eleven Rack Rigs - Soldano SLO-100 DIG Pack #2
Eleven Rack Expansion Pack Required For Use.
Adjust Gain As Needed.
SLO-100 DIG 121B
SLO-100 DIG 121K
SLO-100 DIG 121S
SLO-100 DIG 121V
SLO-100 DIG 121W
SLO-100 DIG 121X
SLO-100 DIG 121Y
Sunday, December 4, 2011
Some how Avid over looked the fact that you could not properly use the on-screen 11R editor because Pro Tools (since version 8.0.1) only includes the needed UI files for the base 11R amps, effects, mics, ect...
To be able to use the the on-screen editor with an 11R that has the ERXP installed you need the updated UI files.
Well Avid has responded by making the ERXP download available to everyone. Before you only had access to the ERXP installer if you purchased the ERXP from the Avid store or another retailer.
Benoni Studios Custom(s) ( aka.."BSC") Eleven Rack Rigs/Presets
BSC Rigs are not modeled after any specific Amp Brands.
BSC Rigs are original creations.
Eleven Rack Expansion Pack REQUIRED for use.
38 Rigs Total.
These are COMPLETE RIGS, meaning every effects slot has been set to a value. In some Rigs- Distortion, or Mod, or FX1 or 2 ect..... may be turned OFF by default, but the effect in the slot has been set to compliment each Rig. So go through each Rig and try out each effect, turn some ON, turn some OFF ect...
RIVERA KNUCKLEHEAD SEVEN Rigs
"B" means the Rig is modeled after a K7 with the Boost ON
K100 - Means the rig referenced was using Celestion G12K-100 speakers
V30 - Means the rig referenced was using Celestion Vintage 30 speakers
Rivera K7 B30 B
Rivera K7 K100 B
Rivera K7 K100
Rivera K7 S+B (combo of Boost ON and OFF)
Rivera K7 V30 B
Rivera K7 V30
Rivera K7 CLEAN (Clean sound of the K7)
RIVERA KNUCKLEHEAD TRE Rigs
Rivera K-Tre C1
Rivera K-Tre JD1
Rivera K-Tre JD2
Rivera K-Tre JD3
Rivera K-Tre JD4
RIVERA KNUCKLEHEAD SEVEN & TRE Rig
A Hybrid of the tone of the K7 and K-Tre
The names *Rivera*, *Knucklehead*, *Seven*, and *Tre* are only used to describe the tone of the presets.
These presets are NOT endorsed by Avid, or Rivera
H&K Coreblade U1
H&K Coreblade U2
These are an emulation of the Coreblade amps Ultra 1 and Ultra 2 channels respectively
These Rigs are NOT endorsed by Avid or Hughes & Kettner
PF Comfort Numb
The names *Comfortably Numb* and *Pink Floyd* are only used to describe the tone of the presets.
These presets are NOT endorsed by Avid, David Gilmore, or Pink Floyd
Adjust GAIN to taste, the sounds I had to work with had alot of gain, so I modeled the Rigs to be close.
2 presets based on a Nitro with EL43's
2 presets based on a Nitro with KT88's